KJ-RT1000-166(1500) Six-temperature-zone rotary tube furnace

Model：KJ-RT1000-166(1500)

Description：

It is designed for the sintering of inorganic compounds, such as mineral particles and battery materials, with better uniformity. Multiple heating zones, condensers and tail gas collection devices can be selected according to different experiments.

Introduction:
The rotary tube furnace is a high temperature tube furnace with special rotation and tilting functions. It is designed for the sintering of inorganic compounds, such as mineral particles and battery materials, with better uniformity. Multiple heating zones, condensers and tail gas collection devices can be selected according to different experiments.

Six-temperature-zone rotary tube furnace display

Model		KJ-RT1000-166(1500) Rotary tube furnace
Standard Parts heating
Heating Furnace	Furnace Feature	Furnace shell: High intensity carbon steel with electrostatic spraying. Process using grinding mouth cavity seal sealing interface is stable and reliable Temperature of furnace shell below 60℃
	Display	LED Display with independent control
	Furnace door design	Split type, electric opening mode
	Max Temperature	≤1100℃
	Continuous Working Temp.	≤1000℃
	Cooling system	Air-cooling system
	Tube Material	Quartz Tube
	Tube size	166mm(Otter diameter)
	Tube length	2000mm (Base on final design)
	Tube Baffle Design	There would be some tube paddle setting inside the tube for better mix the material, paddle amount base on final design..
	Hot zone amount	6 zones
	Hot zone length	250×250×250×250×250×250mm
	Heating element	SIC Rod (For easy maintenance)
	Chamber Material	Alumina Fiber
	Heating Rate	0-10℃/min
	Thermocouple	N type
	Mobile box	The furnace is designed with removable type
	Temperature Control	● PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor. ● 30 programmable segments for precise control of heating rate, cooling rate and dwell time. ● Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
	Safety Element	Over-temperature alarm Over-current protection Thermocouple broken indication
	Power Supply	380V, 50Hz, 3 phases
	Output Power	Base on final design
	Tilting Angle	0-5℃(An extra protractor will be made on the furnace, that would be easy for setting the tilting angle you need)
	Tube rotating Speed	1-3rpm
	Material Feeding Design	Feeding by Manually
	Material Discharge Design	Tilting for remove the material
	Flange Design	Hinged vacuum flange design(One side for material feeding) Common vacuum flange design(the other side) 1/4” NPS gas inlet and out
Warranty		One year limited warranty&lifetime technical support (Consumable parts such as heating elements are not covered by the warranty)

KJ-RT1000-166(1500) Six-temperature-zone rotary tube furnace

Single-Zone Tube Furnace

Multi-Zone Tube Furnace

Rotary Tube Furnace

Vertical Tube Furnace

Slideway Tube Furnace

RTP fast Annealing Furnace

Lab Scale Pyrolysis Furnace

Diffusion Oxidation Tube Furnace

Ultrasonic Spray Pyrolysis Furnace

High temperature high pressure

OLED material purification

400℃-1200℃ Box Furnace

1300℃-1400℃ Box Furnace

1500℃-1700℃ Box Furnace

Bell Type Furnace

Crucible Furnace

Bogie Hearth Furnace

CVD Furnace System

PECVD Furnace System

Roll-to-roll graphene film growth equipment

LP/AP CVD System

Coating equipment

Vacuum Sintering Furnace

Vacuum Annealing Furnace

Vacuum Brazing Furnace

Vacuum Tempering Furnace

Vacuum Hot Pressing Furnace

Vacuum Gas Quenching Furnace

Vacuum Carbon Tube Furnace

400℃-1200℃

1300℃-1400℃

1500℃-1700℃

Custom Vacuum Furnace

Custom Box Furnace

Custom Tube Furnace

Zirconia Sintering Furnace

Porcelain Press Furnace

Vacuum Porcelain Furnace

Dental Dewaxing Furnace

Vacuum System and Gas Mixing System

Reactors

Induction Furnace

Vacuum Oven

Accessories and Consumables